MA1012-EA
Operation Guide 5158
About This Manual
x Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
x Button operations are indicated using the letters shown
in the illustration.
E-1
Procedure Lookup
The following is a handy reference list of all the operational procedures contained in
this manual.
Contents
General Guide.......................................................................................................... E-4
Calendar ................................................................................................................... E-6
Timekeeping............................................................................................................. E-8
Setting the Analog Time ....................................................................................... E-10
About the Backlight............................................................................................... E-11
Alarm ...................................................................................................................... E-12
Stopwatch .............................................................................................................. E-15
Dual Time ............................................................................................................... E-16
Specifications ........................................................................................................ E-18
To set the date ......................................................................................................... E-6
To set the digital time.............................................................................................. E-8
To adjust the analog time ..................................................................................... E-10
To set the alarm time............................................................................................. E-13
To stop the alarm................................................................................................... E-13
To switch the daily alarm on and off ................................................................... E-14
To test the alarm.................................................................................................... E-14
To measure elapsed time...................................................................................... E-15
To set the Dual Time ............................................................................................. E-16
E-2
E-3
General Guide
x Press C to change from mode to mode.
x In any mode (except when making any settings), press L to illuminate the digital
display for about two seconds.
Alarm Mode
Stopwatch Mode
Dual Time Mode
Calendar Mode
Timekeeping Mode
Press C.
E-4
E-5
2. While any setting is selected (flashing), press C to increase it. Holding down C
changes the flashing setting at high speed.
Calendar
3. Press B to move the selection around the display in the above sequence.
x The day of the week is automatically set in accordance with the date.
x The date can be set with the range of January 1, 2000 to December 31, 2099.
To set the date
Hold down B.
Press B.
9EAR
x If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Calendar Mode automatically.
-ONTH
$AY
Press B.
Press B.
Month Day of week
Day
1. In the Calendar Mode, hold down B for about two seconds, until “ADJ” and then
the year digits flash on the display. Keep B depressed until the year digits flash.
E-6
E-7
1. In the Timekeeping Mode, hold down B for about two seconds, until “ADJ” and
then the seconds digits flash on the display. Keep B depressed until the seconds
digits flash.
2. While the seconds digits are selected (flashing), press C to reset the seconds to
00. If you press C while the seconds count is in the range of 30 to 59, the seconds
are reset to 00 and 1 is added to the minutes. If the seconds count is in the range of
00 to 29, the minutes count is unchanged.
3. Press B to move the selection around the display in the above sequence.
4. While hour or minutes are selected (flashing), press C to increase the setting.
Holding down C changes the current setting at high speed. While the 12/24-hour
setting is selected, press C to switch between the two formats.
Timekeeping
This watch features separate digital and analog timekeeping. The procedures for
setting the digital time (page E-8) and analog time (page E-10) are different.
To set the digital time
PM indicator
Hold down B.
Press B.
3ECONDS
ꢀꢁꢂꢁꢃ
(OUR
Press B.
x If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Timekeeping Mode automatically.
-INUTES
Press B.
Press B.
Hour
Seconds
Minutes
E-8
E-9
|
Black Box Switch KV1106A User Manual
Bogen Speaker System AE 6B User Manual
Bosch Appliances Boiler 25Si User Manual
Bosch Appliances Home Security System LTC 5136 User Manual
Braun Electric Shaver 2550 User Manual
Canon Film Camera 8089a002 User Manual
Casio Digital Camera EX Z400 User Manual
Casio Watch AQW1011AV User Manual
Chief Manufacturing Indoor Furnishings MF1 Series User Manual
Chromalox Electric Heater PF452 4 User Manual